- Manuals
- Brands
- National Vacuum Equipment Manuals
- Water Pump
- 607 challenger series
- Owner's manual and operating instructions
Rotary vane vacuum pumps
Hide thumbs Also See for 607 challenger series:
- Replacement and rebuild manual (20 pages)
- Contents
- Table of Contents
- Troubleshooting
- Bookmarks
Table of Contents
-
Operating Instructions
-
Important Information
-
Table of Contents
- Introduction
-
General Information
-
- Limited Warranty
-
Warranty
-
- 607 Challenger
-
Application
-
Pump Specifications
-
System Requirements
-
Drive System
-
Factory Settings
-
Adjusting Factory Oil Settings
-
- Operating Instructions
-
Normal Operation
-
Recommended Lubricant
-
Maintenance
-
Cold Weather Operation
-
- Troubleshooting
-
Pump Overheats
-
Pump Uses too Much Oil
-
Pump Doesn't Turn
-
No Vacuum
-
System Troubleshooting
-
Making a Vacuum Tester
-
- Parts Breakdown
-
607 Challenger Series Vacuum Pumps Parts List
-
607 Fan Cooled Parts Diagram
-
607 Liquid Cooled Parts Diagram
-
607 SV Parts Diagram
-
607 Fan Cooled Parts Oil Line Routing
-
607 Liquid Cooled Oil Line Routing
-
Automatic Oil Pump Parts List (Three Outlet)
-
Automatic Oil Pump Parts Diagram (Three Outlet)
-
Automatic Oil Pump Parts List (Four Outlet)
-
Automatic Oil Pump Parts Diagram (Four Outlet)
-
Advertisem*nt
Quick Links
- 1 Pump Specifications
- 2 607 Challenger Series Vacuum Pumps Parts List
- Download this manual
National Vacuum Equipment
Owner's Manual
&
Operating Instructions
607 Challenger Series Rotary Vane Vacuum Pumps
Visit our web site to download pump setup guides,
MADE
IN USA
brochures and other technical information.
Table ofContents
Advertisem*nt
Table of Contents
Troubleshooting
Related Manuals for National Vacuum Equipment 607 challenger series
-
Water Pump National Vacuum Equipment 607 challenger series Replacement And Rebuild Manual
Rotary vane vacuum pumps (20 pages)
-
Water Pump National Vacuum Equipment 607 PRO Challenger Series Owner's Manual
Rotary vane vacuum pumps (48 pages)
-
Water Pump National Vacuum Equipment 887 Challenger Series Owner's Manual
Rotary vane vacuum pumps (32 pages)
-
Water Pump National Vacuum Equipment WPT 480/P Owner's Manual And Operating Instructions
(52 pages)
Summary of Contents for National Vacuum Equipment 607 challenger series
-
Page 1: Operating Instructions
National Vacuum Equipment Owner’s Manual & Operating Instructions 607 Challenger Series Rotary Vane Vacuum Pumps Visit our web site to download pump setup guides, MADE IN USA brochures and other technical information. - Page 2 Owner’s Record Date of Purchase: _________________________ Purchased from: __________________________ Serial Number: ____________________________ © 2012 National Vacuum Equipment, Inc. Revision: 4 (Release) March 2012 No part of this manual may be reproduced without the written permission of National Vacuum Equipment, Inc.
-
Page 3: Important Information
IMPORTANT INFORMATION FOR INSTALLING PUMP 607 CHALLENGER SERIES PUMPS AERIAL VIEW SHADED AREA MUST BE KEPT CLEAR FOR SERVICING THE FILTER Clockwise Counter Clockwise Rotation Rotation www.natvac.com | 800.253.5500 607 Challenger Series | 3... -
Page 4: Table Of Contents
No vacuum ��������������������������������������������������������������������18 System Troubleshooting ������������������������������������������������18 Making a vacuum tester ������������������������������������������������19 Parts Breakdown 607 Challenger Series Vacuum Pumps Parts List ���������20 607 Fan Cooled Parts Diagram �������������������������������������23 607 Liquid Cooled Parts Diagram ����������������������������������24 607 SV Parts Diagram ���������������������������������������������������25 607 Fan Cooled Parts Oil Line Routing �������������������������26 607 Liquid Cooled Oil Line Routing �������������������������������27... -
Page 5: Introduction
“one-stop shop” for manufacturers and distributors of vacuum equip- ment� Our History National Vacuum Equipment, Inc� was founded in 1980 by Bruce Luoma� The Company started as a retailer of vacuum pumps� Soon after it started, the Company secured the rights to exclusive distribution of the Battioni vacuum pumps in North America�... -
Page 6: Limited Warranty
Manufacturer’s liability under this or any other warranty, whether express or implied, is limited to repair of or, at the manufacturer’s option, replacement of parts which are shown to have been defective when shipped www.natvac.com | 800.253.5500 6 | 607 Challenger Series... - Page 7 7� Manufacturer’s liability shall not be enforceable for any product until National Vacuum Equipment, Inc� has been paid in full for such product� 8� Except to the extent expressly stated herein, manufacturer’s liability for incidental and consequential damage is hereby excluded to the full extent permitted by law�...
- Page 8 •Product must be returned to NVE freight prepaid in the most economical way� •Credit will be issued for material found to be defective upon our inspection, based upon prices at the time of purchase� www.natvac.com | 800.253.5500 8 | 607 Challenger Series...
-
Page 9: 607 Challenger
•Proven applications are: -Oilfield -Septic - Restaurant Grease - Industrial Waste Pump Specifications 607 Calculated Flow Data Pressure (PSI) Free Flow Vacuum (in Hg) 1500 1250 1000 www.natvac.com | 800.253.5500 607 Challenger Series | 9... -
Page 10: System Requirements
3. Once obtained the desired pressure, screw down the lock nut “D” 4. Screw down the protection cap and fix it using the rings “E” situated on the valve body and on the cap www.natvac.com | 800.253.5500 10 | 607 Challenger Series... -
Page 11: Drive System
The pump should consume 12 oz� - 15 oz� of oil per hour� Please contact us if oil usage is outside of these parameters� •It is the responsibility of the installer to ensure proper vacuum and pressure settings and RPM� www.natvac.com | 800.253.5500 607 Challenger Series | 11... -
Page 12: Adjusting Factory Oil Settings
4� Loosen the jam nut and turn adjusting screw clockwise toreduceoilfloworcounterclockwisetoincreaseoil flow. 5� When making adjustments do so one turn of the screw at a time and test before making further adjustments� www.natvac.com | 800.253.5500 12 | 607 Challenger Series... -
Page 13: Operating Instructions
• Do not operate your pump for extended periods of time at vacuum levels which cause the pump to exceed 375 degrees Fahrenheit exhaust gas temperature� Guards • Make certain all guards are in place prior to running your pump� Think Safety! www.natvac.com | 800.253.5500 607 Challenger Series | 13... -
Page 14: Recommended Lubricant
* NVE ISO 68 Oil is our recommended pump oil for the Challenger series vacuum pumps� Challenger Vacuum Pump Oil is sold by the case, six 1 gallon containers of oil per case� www.natvac.com | 800.253.5500 14 | 607 Challenger Series... -
Page 15: Maintenance
7 vane slots, it’s time to replace the vanes� • Vanes should be replaced in sets and it is always a good idea to have an extra set of vanes on hand for emergen- cies� www.natvac.com | 800.253.5500 607 Challenger Series | 15... -
Page 16: Cold Weather Operation
• If the pump is frozen, thaw it out by moving the truck into a heated building� Avoid freezing problems • You can avoid freezing problems by putting a small amount of diesel fuel into the pump at the end of the day� www.natvac.com | 800.253.5500 16 | 607 Challenger Series... -
Page 17: Troubleshooting
Pump uses too much oil •Oil pump set too rich •Leaving pump under vacuum between jobs •Product running through pump Pump doesn’t turn •Broken vane or bearing •Pump is frozen •Problem in the drive train www.natvac.com | 800.253.5500 607 Challenger Series | 17... -
Page 18: No Vacuum
• If the pump checks out ok, check the vacuum level at the secondary, then the primary shutoff� Keep working your waybackuntilyoufindtheproblem. For rebuild instructions please visit our website at www.natvac.com or call us at 800-253-5500 www.natvac.com | 800.253.5500 18 | 607 Challenger Series... -
Page 19: Making A Vacuum Tester
3� Assembletheflange,nipple,pipecapand vacuum gage� 4� Removeaflangefromthefour-wayvalveonyour pump� 5� Startthepumpandconfirmthelocationyouhave chosen to test from is at vacuum� 6� UsingtheexistingO-ring,fastenthetestingflange to your pump� 7� Start your pump and read the vacuum level on the gauge� www.natvac.com | 800.253.5500 607 Challenger Series | 19... -
Page 20: Parts Breakdown
KEY, 3/8" X3/8" X 2 120-059 PLUG, BRASS 1/4" NPT, HEX HD. 120-220-1 1/8" NPT THERMOMETER 220 F 120-047-1 DRAIN PLUG, 3/4" NPT MAGNETIC 120-047 DRAIN PLUG, 3/4" NPT 120-107 TAG, SERIAL NUMBER, BRASS www.natvac.com | 800.253.5500 20 | 607 Challenger Series... - Page 21 DECAL, WARNING-GUARDS 310-LP5 HOSE BARB TO MALE PIPE 310-LP6 HOSE BARB, 1/4 TO 1/4NPT STRT 320-407-003 OIL LINE, BLK 1/4" ID 30R7 320-083-009 OIL TANK FILTER, 100 MESH 320-082-001 OIL TANK, 5QT, W/LOGO www.natvac.com | 800.253.5500 607 Challenger Series | 21...
- Page 22 HHCS 1/4-20 UNC X 2.75 FW - 1/4 USS FLAT WASHER - 1/4" USS BHCS - 1/4-20 UNC X 0.50 BHCS - 1/4-20 UNC X 0.50 HEX NUT - 3/8 UNC HEX NUT - 3/8 UNC www.natvac.com | 800.253.5500 22 | 607 Challenger Series...
-
Page 23: 607 Fan Cooled Parts Diagram
| 800.253.5500 607 Challenger Series | 23... -
Page 24: 607 Liquid Cooled Parts Diagram
| 800.253.5500 24 | 607 Challenger Series... -
Page 25: 607 Sv Parts Diagram
| 800.253.5500 607 Challenger Series | 25... -
Page 26: 607 Fan Cooled Parts Oil Line Routing
| 800.253.5500 26 | 607 Challenger Series... -
Page 27: 607 Liquid Cooled Oil Line Routing
| 800.253.5500 607 Challenger Series | 27... -
Page 28: Automatic Oil Pump Parts List (Three Outlet)
R on 3 Port CW CW Worm CCW Worm 2 Port 1 Port Side Side L on 3 Port CCW R on 3 Port CCW 1 Port 2 Port Side Side ww.natvac.com www.natvac.com | 800.253.5500 28 | 607 Challenger Series... -
Page 29: Automatic Oil Pump Parts Diagram (Three Outlet)
Detail - Key # 26 Automatic Oil Pump Three Outlet Type Part Part # 320 - LW32AD Clockwise Part # 320 - LW32AS Counterclockwise National Vacuum Equipment 800.253.5500 www.natvac.com www.natvac.com | 800.253.5500 607 Challenger Series | 29... -
Page 30: Automatic Oil Pump Parts List (Four Outlet)
Jam Nut 320-P16 320-P5 and 320-PA5 Details L and R on 4 Port CW CW Worm CCW Worm 2 Port Gear L and R Gear on 4 Port CCW 2 Port Gear w.natvac.com www.natvac.com | 800.253.5500 30 | 607 Challenger Series... -
Page 31: Automatic Oil Pump Parts Diagram (Four Outlet)
Detail - Key # 26 Automatic Oil Pump Four Outlet Type Part # 320 - LW32BD Clockwise Part # 320 - LW32BS Counterclockwise National Vacuum Equipment 800.253.5500 www.natvac.co www.natvac.com | 800.253.5500 607 Challenger Series | 31... - Page 32 National Vacuum Equipment, Inc. P.O. Box 685 Traverse City, MI 49685 USA 231.941.0215 Phone 231.941.2354 Fax www.natvac.com | 800.253.5500 32 | 607 Challenger Series...